Hubs

Product specs: - Front hub features - 7075 t6 alloy axle - Qr or 15mm axle type - Japanese cartridge bearings - 28,32 hole count - 205g - Rear hub features - 7075 t6 alloy axle - Qr or 12x142mm axle type - Four sealed cartridge bearings - 28,32 hole count - 325g

- Kick-shift 2-speed hub - Coaster brake - Benefits include its simple backpedal-action shifting/braking and no cables or shifters - 6061 aluminum hub shell with 13/32" slotted solid axle (162mm overall axle length) - Gear ratio range of 138% - Includes 22 tooth 3-spline cog - 116mm OLD (over-locknut dimension)

- Internal gear 3-speed hub with HG-splined 8-10sp freehub body for use with any IS 6-bolt disc brake - 6061 aluminum hub shell with 13/32" slotted solid axle (179mm overall axle length) - Gear ratio range of 177% (33% each step) - Cassette and shifters sold separately. Special shifter setup required: internal 3sp is shifted via a standard mountain 3sp front derailleur shifter. Sturmey Archer shifters not compatible with this hub

- Threaded for multi-speed freewheel (7sp), includes 70mm drum brake - A356 aluminum hub shell with 9mm solid axle (183mm overall axle length) - Freewheel and brake lever sold separately

- A356 aluminum hub shell with 9mm solid nutted axle (136mm overall axle length) - Choose 70mm or 90mm drum brake front hub (brake lever sold separately)

- Dynamo generator front hub features 3.0-watt headlight power supply - A356 aluminum hub shell with 9mm solid nutted axle (140mm overall axle length) - Choose 70mm or 90mm drum brake (brake levers sold separately) - Light sold separately

- Use a front/reat set or match the front with Sturmey 3sp fixed rear or 2sp kickback rear - 6061 aluminum shell with sealed cartridge bearing and solid nutted axle (145mm front/175mm rear overall axle length) - Rear is flip-flop threaded for freewheel

- Ultra-tough 5 bearing Single Speed rear hub for All Mountain, DJ, FR, Pumptrack, and BMX. - Integrated 3mm 11T Cog Freehub (for 1/8" SS Chains) - Female Axle, M10 Lock-down Bolts, Alloy End-Caps - Wide Flange design eliminates dish in rear wheel, maximizing wheel strength & stiffness - Hole count: 32H - 6-bolt

- eMTB rated with steel axles - 6902 cartridge bearings and robust 10 degree engagement - 32h spoke count - For J-Bend spokes only

Freehub for OneUp Rear Hubs. Available in XD/XDr, Hyperglide (HG) and Microspline (MS). Includes drives side end cap. Our XD / XDr Freehub can function as an XD freehub with the 1.85mm spacer installed or as an XDr freehub by removing the spacer.

This is the front hub we want on our bikes. Lightweight, durable, with high quality bearings and seals to give you the best combination of performance, durability and price. This is the new benchmark for a no-nonsense front hub.

This is the rear hub we want on our bikes. A lightweight, durable, ratchet drive hub with high quality bearings and seals to give you the best combination of performance, durability and price. This is the new benchmark for a no-nonsense rear hub.

Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards. - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - 6 pawl, 6 phase - 115 tooth drivering - Easily serviced with no proprietary tools. Designed to keep you in the saddle and out of the service queue - Classic j-bend spoke interface - Steel cartridge bearings are durable

Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards. - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - 6 pawl, 6 phase - 115 tooth drivering - Easily serviced with no proprietary tools. Designed to keep you in the saddle and out of the service queue - Classic j-bend spoke interface - Steel cartridge bearings are durable

Building on Hope’s 30+ years of manufacturing hubs, the Pro 5 is the combination of all of our experience into a product to meet and exceed the demands of current and future bike technology. KEY FEATURES - Sealed stainless Steel cartridge bearings - Hub shell machined from forged aluminium billet - Standard 6 bolt disc fitting - Larger spoke flange to enable stiffer wheel builds - Unsurpassed reliability - Available in both standard 15mm, 20mm and Torq end cap options - Hub flanges are moved outboard 5mm compared to the standard 100m front hub to increase wheel stiffness - Available Black, Silver, Bronze, Red, Blue, Purple and Orange - Available in 24, 28, 32 and 36 hole drillings - Machined from forged 2014 T6 Aluminium billet - Conversions available for 15mm Boost, 20mm Boost and Torq **Note**Boost 110mm front hub uses a different, wider hub body compared to the standard 100mm front hub

Building on Hope’s 30+ years of manufacturing hubs, the Pro 5 is the combination of all of our experience into a product to meet and exceed the demands of current and future bike technology. KEY FEATURES - Improved sealing to stop dirt ingress and to reduce drag - New Labyrinth seal has zero drag for incredible freewheeling performance - New Pawls/Springs design to increase longevity, load capacity & a reduction of drag. - Increased engagement from 44 to 108 with a new offset 6 pawl freehub design - Wire cut pawls from high strength steel for maximum strength. - New step down axle design for a stiffer more durable freehub - New hub body profile for increased stiffness without adding weight - Ebike Specific hub designed for the demands of ebikes - Fully serviceable and rebuildable with simple tools - Available in 24, 28, 32 and 36 hole drillings - Available with all modern freehub bodies - End spacers can be easily swapped to suit different frame and axle standards - 6 bolt or Centrelock disc fitting - Available in Black, Silver, Bronze, Red, Blue, Orange & Purple

Hope Front Axle Conversion Kits · Compatible with Pro 2 and Pro 2 Evo hubs · Converts all Hope Pro 2 and Pro 2 Evo hubs to 15mm through axle hubs

12x142mm conversion endcaps for Hope Pro 2 Evo rear hubs.

- Axle/Spacing: 10/14 x 135mm bolt-on - 14mm adapters included - Micro-drive cassette rear hub for singlespeed and dirt jump - International Standard 6-bolt disc rotor mount - Bushed driver for greater durability over cartridge bearings (bearings have to be smaller for micro-drive, thus prone to higher loads) - Forged 6061 aluminum shell, 2 main body sealed cartridge bearings - CrMo M10 bolt-in fittings with 6mm anti-rotation hex fitting (helps when tightening wheel in frame) - 12mm thru-axle conversion for DJD-BD available separately - No cog included - 9/10/11/13/16t mini sprockets available separately

- Axle/Spacing: 10/14 x 135mm nutted - International Standard 6-bolt disc rotor mount - 11 tooth (1/8") steel cog is pre-installed, ideal for compact drivetrain setup - Tough, instant pickup 120 point triple wedge pawl system with a bushed mini threaded driver for Singlespeed and Dirt Jump - Bushed driver is more durable than cartridge bearings - Forged 6061 aluminum shell, 2 main body sealed cartridge bearings - CrMo M10 bolt-in fittings with 6mm anti-rotation hex fitting (helps when tightening wheel in frame), 14mm adapters included

- Axle/spacing: 10 x 120mm nutted - Hole: 32-hole - Weight: 304g - CNC machined, high-polished, high-flange aluminum shell - Japanese sealed cartridge bearings - Hollow CrMo nutted axle with titanium color finish - 120mm OL spacing rear hub with either double fixed flip-flop threading or fixed on one side and freewheel thread on the opposite - 130mm OL rear axle conversion sold separately

- Light but strong enough for all types of riding including XC through DH - Forged CNC machined aluminum shell 2 sealed cartridge bearings - International Standard 6-bolt disc rotor mount - End caps for 9x100mm QR available separately - Boost version (HL-3208) is 15x110mm only - Flange diameter: 58mm left/right - Center to flange: 22mm left 30mm right

The pinnacle among the hubs–Ratchet EXP united with SINC ceramic bearings. The premium 180 hub convinces with its sophisticated Ratchet EXP technology, giving the hub extra lightness, stiffness, and precision along with easy, no-tool maintenance. Furthermore, assembled with the low-friction SINC ceramic bearings, the hub performs efficiently and brings your power directly to the road. The hub is available for straight pull spokes only.

Aluminum rear hub for bicycle - 18P DBCL 24 holes, straightpull, black. Aluminum Campagnolo freehub body, black. - Dimension: 12x142mm

The pinnacle among the hubs–Ratchet EXP united with SINC ceramic bearings. The premium 180 hub convinces with its sophisticated Ratchet EXP technology, giving the hub extra lightness, stiffness, and precision along with easy, no-tool maintenance. Furthermore, assembled with the low-friction SINC ceramic bearings, the hub performs efficiently and brings your power directly to the road. The hub is available for straight pull spokes only.

Aluminium front hub for bicycle - 18P DBCL 24 holes, straight pull, black. Dimension: 12x100mm.

Direct power transmission in every riding situation—240 with Ratchet EXP. With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.

Direct power transmission in every riding situation—240 with Ratchet EXP. With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.

The number to count on—240 with Ratchet EXP. The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.

The number to count on—240 with Ratchet EXP. The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.