Forks

• Cantilever brake mounts • High-tensile steel construction • Threaded fork • Steerer diameter: 1-inch • Steerer length: 200mm • For bikes with 26-inch wheels

An entry level fork with the latest features and performance; Judy Silver is built around a brand new chassis derived from the Pike, works with Plus tires up to 2.8 in both the 27.5" and 29" models. Judy Silver features the Motion Control RL damper and is compatible with OneLoc remotes and has Fast Black upper tubes for an all-black look and low friction performance. - 80-120mm travel - External rebound - TurnKey lockout controls - Fast Black upper tubes - Motion Control RL damper - Compatible with OneLoc remote - Solo Air spring

- Designed for cantilever brakes - Tange Infinity CrMo steel blades with D-shaped cross section - Fender eyelets at fork tips - Low rider pannier rack eyelets - Steerer 1-1/8", 350mm long, CrMo - Axle to crown 400mm - 44mm rake - Anti-rust coating - Max tire clearance 700c x 40mm (27.5 x 2.0") - Black

- Premium Cyclocross fork with CrMo blades - 300mm steerer (uncut) 30.0mm race 44mm straight rake fork - Designed to match the Soma Double Cross disc frame - Designed for disc brakes, 160mm rotors (International mount) - Straight blade design with D-shaped cross-section blades - Tange Infinity CrMo steel - 350mm 1-1/8" steerer - 400mm axle to crown - Two sets of fork-tip eyelets - Low rider pannier rack eyelets - 60mm inside width

- Tange Infinity CrMo steel fork for 27.5 (650b) or 29 MTB wheels - Suspension corrected for 100mm travel 29er frames or 120-130mm 650b frames - Unicrown with straight D-shaped blades International Standard disc mount - 47mm rake - Mini Rack Mounts

A tough unicrown fork option for the Soma Wolverine and other gravel/CX frames with a 1-1/8" headtube. Version 3 model has a new fork end design and adopts the flat mount disc standard - Unicrown design with Tange Infinity CrMo steel tubing - Triple bosses on fork leg to fit low rider pannier rack or cage - Fits 700c x 45mm tires with fenders

Redesigned by the world’s fastest racers, for the world’s fastest racers, you want BoXXer in your corner. The all-new 38mm chassis is equipped with the DebonAir+ twin tube air spring that will have you thinking it’s a coil. Paired with a Charger 3 RC2 damper tuned for downhill speed, BoXXer Ultimate takes you straight to the top step of the podium. And with our new crown adjustment lines, setup is a breeze—no rulers required. FEATURES - 38mm chassis designed to meet the needs of the world’s fastest racers with balanced stiffness and ride quality - DebonAir+ twin tube air spring strikes the perfect balance between butter-smooth small bump feel, added support throughout the travel, and taller ride height for confidence when things get steep - Signature colorway BoXXer Electric Red with an all-new graphics package - RockShox premium fender compatibility (RockShox Bolt-On Fender included with purchase) - Lightweight machined and anodized crown for premium looks and durability - Crown height gradient creates a visual guide to simplify setup, no ruler required - Charger 3 damper tuned for BoXXer’s updated chassis and spring. Featuring High Speed Compression, Low Speed Compression, and a revamped Low Speed Rebound, every click is meaningful and exact. This allows the rider to tune to perfection with every click. - ButterCups block 20% of high-frequency “trail chatter” to reduce hand and arm fatigue, leaving you feeling fresh with more control - Ultra-low-friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Gold level gives you aluminum upper tubes and Motion Control damping. Features - New graphics package with E-MTB endorsement option (15x110mm) - Motion Control damping featuring low-speed compression adjustment to lockout - Fits Tires up to 2.8" - Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look - Highly tunable Solo Air spring

An entry level fork with the latest features and performance; Judy Silver is built around a brand new chassis derived from the Pike, works with Plus tires up to 2.8 in both the 27.5" and 29" models. Judy Silver features the Motion Control RL damper and is compatible with OneLoc remotes and has Fast Black upper tubes for an all-black look and low friction performance. - 80-120mm travel - External rebound - TurnKey lockout controls - Fast Black upper tubes - Motion Control RL damper - Compatible with OneLoc remote

- 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible. - Charger RC damper featuring Low Speed Compression adjust - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. - RockShox premium short fender included - Maxima Plush damping fluid reduces friction and silences damper noise

Lyrik harmonizes descending power with effortless efficiency. And it does it all with help from Flight Attendant. The groundbreaking automatic suspension system has an improved algorithm with all new personalization to match your riding preferences, your terrain, your style, and your physical capabilities. Lyrik’s legendary performance enters a new era with the Charger 3.1 Flight Attendant damper for the right balance of comfort, control, and speed. Features: - NEW Remove suspension complexity to elevate your ride experience. Flight Attendant has an all new algorithm that uses a suite of sensors to read rider and terrain inputs to anticipate the perfect suspension position. No other suspension system has this level of personalization to match your riding preferences, your terrain, your style, and your physical capabilities. Elevate your ride. NEW Flight Attendant features include fork-only update for hardtail bikes, Launch Control, and customizable Auto Mode to disable "Pedal" or "Lock" positions. - NEW To meet the demands of the world’s best riders, Charger 3.1 Flight Attendant electronic automatic damper is a brilliant evolution of our proven Charger 3 damper platform. With a refined compression range, the Charger 3.1 Flight Attendant damper gives you the traction, control, and comfort you need to charge dicey lines all day. - NEW Ever on the quest to eliminate friction, a new bushing package further reduces friction with an updated process at the factory level to give riders a better feel right out of the box. Available in NEW Electric Red Signature colorway or Ultimate High Gloss Black. - ButterCups block 20% of high frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - DebonAir+ air spring is built to strike the perfect balance of what riders really want: a butterlike small bump feel, increased air volume to add support throughout the travel, and higher overall ride height for more confidence when things get steep. - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. - Bolt-in torque cap adapters now included for use with standard hub end caps. - Lightweight machined and anodized crown for premium looks and durability. - Short fender compatibility. (RockShox fender included) - Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel. - Short fender compatibility. (RockShox fender included)

The most versatile fork in our lineup, Lyrik harmonizes descending power with effortless efficiency. Lyrik’s legendary performance enters a new era with the Charger 3.1 RC2 damper that offers a wider tunable range of adjustments for the perfect suspension action. Lyrik Ultimate packs an orchestra of industry-leading tech like the ButterCups technology and a DebonAir+ air spring in a stout 35mm chassis. Now better than ever, Lyrik is ready to push your limits. FEATURES - NEW To meet the demands of the world’s best riders, Charger 3.1 is a brilliant evolution of our proven damper platform. With increased damping range and High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments, Charger 3.1 smooths out the roughest trails. - NEW Charger 3.1 RC2’s adjustment range is broader—with less compression damping in the LSC open position and additional support in the HSC closed position, you get the traction, control, and comfort you need to charge dicey lines all day. - NEW Ever on the quest to eliminate friction, a new bushing package further reduces friction with an updated process at the factory level to give riders a better feel right out of the box. - ButterCups block 20% of high-frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - DebonAir+ air spring is built to strike the perfect balance of what riders really want: a butterlike small bump feel, increased air volume to add support throughout the travel, and higher overall ride height for more confidence when things get steep. - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. - Bolt-in torque cap adapters now included for use with standard hub end caps. - Lightweight machined and anodized crown for premium looks and durability. - Available in the Signature colorway Heavy Meadow Green or Ultimate High Gloss Black. - Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel. - Short fender compatibility. (RockShox fender included)

The most versatile fork in our lineup, Lyrik harmonizes descending power with effortless efficiency. Lyrik’s legendary performance enters a new era with the Charger 3.1 RC2 damper that offers a wider tunable range of adjustments for the perfect suspension action. Lyrik Ultimate packs an orchestra of industry-leading tech like the ButterCups technology and a DebonAir+ air spring in a stout 35mm chassis. Now, better than ever, Lyrik is ready to push your limits. Features: - NEW To meet the demands of the world’s best riders, Charger 3.1 is a brilliant evolution of our proven damper platform. With increased damping range and High high-speed compression, Low low-speed compression, and Low low-speed rebound adjustments, Charger 3.1 smooths out the roughest trails. - NEW Charger 3.1 RC2's adjustment range is broader—with less compression damping in the LSC open position and additional support in the HSC closed position, you get the traction, control, and comfort you need to charge dicey lines all day. - NEW Ever on the quest to eliminate friction, a new bushing package further reduces friction with an updated process at the factory level to give riders a better feel right out of the box. - ButterCups block 20% of high-frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - DebonAir+ air spring is built to strike the perfect balance of what riders really want: a butterlike small bump feel, increased air volume to add support throughout the travel, and higher overall ride height for more confidence when things get steep. - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. - Bolt-in torque cap adapters now included for use with standard hub end caps. - Lightweight machined and anodized crown for premium looks and durability. - Available in NEW Electric Red Signature colorway or Ultimate High Gloss Black. - Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel. - Short fender compatibility. (RockShox fender included)

This is the Pike DJ. It's a cousin to the award-winning Pike, which makes it look a lot like a trail fork — until you ride it. Pike DJ is built on a stout 35mm chassis and includes a custom-tuned Charger damper and specific Solo Air system designed for more bottom-out progression than you'll ever need because your trails eventually require some landings. - New graphics package for a fresh, premium look - Proven Charger damper with specific Dirt Jumping/Slopestyle tune - Specific Solo Air top cap for extra bottom-out progression - Accepts Bottomless Tokens to easily custom-tune the air spring performance to best match your own riding style and suspension preference

- 35mm chassis at home on the trail - stiff, playful, and light, really light - Charger RC damper featuring Low Speed Compression adjust - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. - RockShox premium short fender included - Maxima Plush damping fluid reduces friction and silences damper noise

Ultra-versatile, super capable, lightweight on the scales, heavy on the attitude—this is Pike. Not afraid of the rooty chutes. Unintimidated by the calf-crushing climbs. We’ve updated our trail-capable legend with the new Charger 3.1 RC2 damper. Along with vibration-killing ButterCups, this damper offers better traction, comfort, and control. With more tunable range, Charger 3.1 enables riders to set up the perfect suspension action for their preferences. A fork designed to level up your trail game. Experience the legend. Features: - NEW To meet the demands of the world’s best riders, Charger 3.1 is a brilliant evolution of our proven damper platform. With increased damping range and High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments, Charger 3.1 smooths out the roughest trails. - NEW Charger 3.1 RC2’s adjustment range is broader—with less compression damping in the LSC open position and additional support in the HSC closed position, you get the traction, control, and comfort you need to charge dicey lines all day. - NEW Ever on the quest to eliminate friction, a new bushing package further reduces friction with an updated process at the factory level to give riders a better feel right out of the box. - ButterCups block 20% of high-frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - DebonAir+ air spring is built to strike the perfect balance of what riders really want: a butter-like small bump feel, increased air volume to add support throughout the travel, and higher overall ride height for more confidence when things get steep. - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. - Bolt-in torque cap adapters now included for use with standard hub end caps. - Lightweight machined and anodized crown for premium looks and durability. - Available in NEW Electric Red Signature colorway or Ultimate High Gloss Black. - Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel. - Short fender compatibility. (RockShox fender included)

Built for endless days in the mountains, Pike Ultimate Flight Attendant will keep you out past dinnertime. The groundbreaking automatic suspension system has an improved algorithm with all new personalization to match your riding preferences, your terrain, your style, and your physical capabilities. Pike is upgraded with the Charger 3.1 Flight Attendant damper for the right balance of comfort, control, and speed. The industry-leading automatic suspension system now boasts a fork that’s better than ever before. Features: - NEW Remove suspension complexity to elevate your ride experience. Flight Attendant has an all new algorithm that uses a suite of sensors to read rider and terrain inputs to anticipate the perfect suspension position. No other suspension system has this level of personalization to match your riding preferences, your terrain, your style, and your physical capabilities. Elevate your ride. NEW Flight Attendant features include fork-only update for hardtail bikes, Launch Control, and customizable Auto Mode to disable "Pedal" or "Lock" positions. - NEW To meet the demands of the world’s best riders, Charger 3.1 Flight Attendant electronic automatic damper is a brilliant evolution of our proven Charger 3 damper platform. With a refined compression range, the Charger 3.1 Flight Attendant damper gives you the traction, control, and comfort you need to charge dicey lines all day. - NEW Ever on the quest to eliminate friction, a new bushing package further reduces friction with an updated process at the factory level to give riders a better feel right out of the box. Available in NEW Electric Red Signature colorway or Ultimate High Gloss Black. - Updated DebonAir+ air spring for Pike, with increased volume in the negative chamber for improved traction and small-bump sensitivity. - ButterCups block 20% of high frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue, leaving you feeling fresh with more control. - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. Bolt-in torque cap adapters now included for use with standard hub end caps. - Lightweight machined and anodized crown for premium looks and durability. - Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel. - Short fender compatibility. (RockShox fender included)

Ultra-versatile, super capable, lightweight on the scales, heavy on the attitude—this is Pike. Not afraid of the rooty chutes. Unintimidated by the calf-crushing climbs. We’ve updated our trail-capable legend with the new Charger 3.1 RC2 damper. Along with vibration-killing ButterCups, this damper offers better traction, comfort, and control. With more tunable range, Charger 3.1 enables riders to set up the perfect suspension action for their preferences. A fork designed to level up your trail game. Experience the legend. FEATURES - NEW To meet the demands of the world’s best riders, Charger 3.1 is a brilliant evolution of our proven damper platform. With increased damping range and High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments, Charger 3.1 smooths out the roughest trails. - NEW Charger 3.1 RC2’s adjustment range is broader—with less compression damping in the LSC open position and additional support in the HSC closed position, you get the traction, control, and comfort you need to charge dicey lines all day. - NEW Ever on the quest to eliminate friction, a new bushing package further reduces friction with an updated process at the factory level to give riders a better feel right out of the box. - ButterCups block 20% of high-frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - DebonAir+ air spring is built to strike the perfect balance of what riders really want: a butter-like small bump feel, increased air volume to add support throughout the travel, and higher overall ride height for more confidence when things get steep. - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. - Bolt-in torque cap adapters now included for use with standard hub end caps. - Lightweight machined and anodized crown for premium looks and durability. - Available in the Signature colorway Gloss Silver or Ultimate High Gloss Black. - Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel. - Short fender compatibility. (RockShox fender included)

One of the most successful and hard-working RockShox forks of all time capitalizes on the innovations born from SID. It features a chassis that combines classic XC performance with light trail duties, while a Motion Control damper completes the package, making Reba more capable than ever before. Features - New graphics package for a fresh, premium look - Highly tunable Solo Air spring - TwistLoc and OneLoc remote compatible

With optimized material concentrated at the brace and seal area, outstanding stiffness and steering precision, and new E-MTB configured fork options with fender mounting points, Recon Silver is an all-around performer suited for any MTB or E-MTB bike. Features - New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (15x110mm version) - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Fit Tires up to 2.8" (15x110mm version without fenders; the use of a full fender will reduce tire clearance) - Fast Black finished 32mm steel upper tubes couple stiffness with a premium look

Gravel riders who want to get wild choose Rudy. It’s efficient for days of triple-digit mileage while delivering control and comfort when things get rough. Rudy rides on the superlight Charger Race Day 2 damper with 2-position Compression adjustment: Open and a rock-solid, sprint-ready Lock. Rudy offers precise steering with its 30mm chassis and compatibility for full or short fenders. Gravel riding keeps evolving—isn’t it time to ride a fork that’s on the cutting edge? Features: - NEW Charger Race Day 2 Damper—every detail perfected, every extra ounce shaved away. This is our lightest performance-driven damper ever, featuring 2 Compression positions: Open or a rock-solid Lock. - Solo Air spring tuned for short travel - Machined and anodized crown - Maxima Plush Dynamic Lower Leg Lube reduces friction and enhances fork performance ride after ride - NEW Electric Red Signature colorway - Full fender compatibility using custom stealth stay bosses - 3-bolt mounts to fit a short fender (RockShox fender included) - Maxima Plush damping fluid reduces friction and silences damper noise - Fits up to 700x50 tires - 30mm and 40mm travel options

Cross-country purists… we see you. You’re why SID SL Ultimate is the lightest XC fork on the trail. But weight is meaningless without world-class performance and durability. SID SL features a new Charger Race Day 2 Damper that adapts to anything the race course throws at you. FEATURES - Our lightest 32mm chassis ever. World Cup-proven performance, built for your next podium result. - Longer-travel 110mm option, in case you’re feeling extra. - Charger Race Day 2 damper is the lightest damper on the market. This 2P damper features two compression positions: Open or a rock-solid Lock. - Maxima Plush Dynamic Suspension Lube reduces friction and enhances fork performance ride after ride. - Machined crown for lighter weight and greater strength. - Covetable “Blue Crush” signature colorway and Ultimate High Gloss Black, featuring the new lustrous Pearl White graphics package. - DebonAir air spring is tuned specifically to meet the demands of XC and maintains a higher ride height for increased confidence and control.

Cross-country purists… we see you. You’re why SID SL Ultimate is the lightest XC fork on the trail. But weight is meaningless without world-class performance and durability. SID SL features a new Charger Race Day 2 Damper with three-position (3P) compression damping—rigid Lock, plush Open, and efficient Pedal positions, on demand for every inch of the race course. FEATURES - Our lightest 32mm chassis ever. World Cup-proven performance, built for your next podium result. - Longer-travel 110mm option, in case you’re feeling extra. - Charger Race Day 2 damper is the lightest damper on the market. This 3P damper features three compression positions: Open, Pedal, or a rock-solid Lock. - Machined crown for lighter weight and greater strength. - Covetable “Blue Crush” signature colorway and Ultimate High Gloss Black, featuring the new lustrous Pearl White graphics package. - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. -DebonAir air spring is tuned specifically to meet the demands of XC and maintains a higher ride height for increased confidence and control.

Cross-country purists… we see you. You’re why SID SL Ultimate is the lightest XC fork on the trail. But weight is meaningless without world-class performance and durability. SID SL features a new Charger Race Day 2 Damper with three-position (3P) compression damping—rigid Lock, plush Open, and efficient Pedal positions, on demand for every inch of the race course. FEATURES - Our lightest 32mm chassis ever. World Cup-proven performance, built for your next podium result. - Longer-travel 110mm option, in case you’re feeling extra. - Charger Race Day 2 damper is the lightest damper on the market. This 3P damper features three compression positions: Open, Pedal, or a rock-solid Lock. - Machined crown for lighter weight and greater strength. - Covetable “Blue Crush” signature colorway and Ultimate High Gloss Black, featuring the new lustrous Pearl White graphics package. - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. -DebonAir air spring is tuned specifically to meet the demands of XC and maintains a higher ride height for increased confidence and control.

Climb mountains. Charge descents. SID Ultimate isn’t like other XC forks. It is lighter than ever with a formidable 35mm chassis that holds the line when you’re on the edge. The new Race Day 2 damper features a three-position (3P) compression adjuster—rigid Lock, plush Open, and efficient Pedal positions, all at your fingertips. SID adapts to everything from full-gas cross-country to sporty backcountry loops thanks to a new, higher-volume DebonAir+ spring that’s supple at the top of its travel with tons of tunability. Features NEW 35mm chassis is the perfect blend of light weight and rigidity for the modern XC bike. Plus, we made it lighter…again. NEW Charger Race Day 2 damper is the lightest damper on the market. This 3P damper features three compression positions: Open, Pedal, or a rock-solid Lock. NEW DebonAir+ provides more small-bump sensitivity and tunable mid-stroke support. NEW Bushing package maximizes bushing overlap for a smooth, solid ride. NEW Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. NEW Crown machined to shave weight without compromising strength and stiffness. NEW Electric Red Signature colorway NEW Bolt-in torque cap adapters included for use with standard hub end-caps

Climb mountains. Charge descents. SID Ultimate isn’t like other XC forks. It is lighter than ever with a formidable 35mm chassis that holds the line when you’re on the edge. The new Race Day 2 damper features a three-position (3P) compression adjuster—rigid Lock, plush Open, and efficient Pedal positions, all at your fingertips. SID adapts to everything from full-gas cross-country to sporty backcountry loops thanks to a new, higher-volume DebonAir+ spring that’s supple at the top of its travel with tons of tunability. Features NEW 35mm chassis is the perfect blend of light weight and rigidity for the modern XC bike. Plus, we made it lighter…again. NEW Charger Race Day 2 damper is the lightest damper on the market. This 3P damper features three compression positions: Open, Pedal, or a rock-solid Lock. NEW DebonAir+ provides more small-bump sensitivity and tunable mid-stroke support. NEW Bushing package maximizes bushing overlap for a smooth, solid ride. NEW Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. NEW Crown machined to shave weight without compromising strength and stiffness. NEW Electric Red Signature colorway NEW Bolt-in torque cap adapters included for use with standard hub end-caps

Built for the best riders, ridden on the hardest tracks, ZEB Ultimate rules the world’s toughest enduros. Equipped with the new Charger 3.1 RC2 damper, ZEB gives riders exceptional adjustability for the right balance of comfort, control, and speed. Alongside this flagship damper, the stout 38mm chassis rides on vibration-killing ButterCups and a DebonAir+ spring. The technology you need for the fastest split times, the style you want on the start line: This is ZEB. FEATURES - NEW To meet the demands of the world’s best riders, Charger 3.1 is a brilliant evolution of our proven damper platform. With increased damping range and High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments, Charger 3.1 smooths out the roughest trails. - NEW Charger 3.1 RC2’s adjustment range is broader—with less compression damping in the LSC open position and additional support in the HSC closed position, you get the traction, control, and comfort you need to charge dicey lines all day. - NEW Ever on the quest to eliminate friction, a new bushing package further reduces friction with an updated process at the factory level to give riders a better feel right out of the box. - ButterCups block 20% of high-frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - DebonAir+ air spring is built to strike the perfect balance of what riders really want: a butterlike small bump feel, increased air volume to add support throughout the travel, and higher overall ride height for more confidence when things get steep. - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. - Bolt-in torque cap adapters now included for use with standard hub end caps. - Lightweight machined and anodized crown for premium looks and durability. - Available in Signature colorways Electric Red, Slab Grey or Ultimate High Gloss Black. - Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel. - Short fender compatibility. (RockShox fender included)

With vibration-muting carbon blades, and alloy steerer and crown, the Comp carbon/alloy cross and road fork is ideal for cyclocross pursuits or road riding. - Material: carbon blades / alloy steerer, crown, and dropouts - 1-1/8" straight steerer - Steerer length: 300mm - Axle-crown: 391mm - Rake/Offset: 48mm - Crown diameter: 45mm (1-1/8") - Spacing: 57mm - Minimum tire clearance: 6mm - Wheel compatibility: 700c - Fender mounts

Designed specifically for the demands of long-distance travel, the Brevet Fork lets you ride for days without being bounded by light or dark. Mounting options for either a porteur or lowrider rack promote self-supported randonneuring, while internal dynamo routing helps prove that it’s not always darkest before dawn. With ample clearance for 700 x 40c tires without fenders — or 700 x 36c with — the Brevet Fork features a comfort-inducing 1-1/8” straight steerer for a precise yet forgiving ride experience. Threaded drilling in the crown allows for installing rack lights powered by a dynamo hub.

Ritchey's history with cyclocross runs long and deep, sort of like the mud sections of your favorite 'cross course. The WCS Carbon Cross Canty Fork is designed for the rigors of cyclocross and those who demand traditional canti brakes. Decades of experience between the course tape and building the bikes and components designed to win inform the performance and design details of this fork. It employs a monocoque construction, and it's compatible with standard and integrated headsets. - Material: carbon fiber - 1-1/8" straight steerer with integrated 45-degree crown race - Fits 1-1/8 and 44mm headtubes with appropriate headsets - Steerer length: 300mm - Fork length: 395mm - Rake/Offset: 45mm - Crown diameter: 45mm - Spacing: 54mm - Minimum tire clearance: 6mm - Wheel compatibility: 700c - Weight: 448g (with uncut steerer / not including axle)

The one-piece carbon monocoque WCS Carbon Disc Road Fork has been meticulously engineered and painstakingly built to perform with razor-sharp accuracy, offering a comfortable yet lively riding experience. Built with High Modulus Fiber (HMF), this impeccable road fork offers superior strength and a superb road feel. Smooth internal fiber flow in the crown/steerer area delivers the best force transfer from crown to shaft and increased impact strength. The orientation of the fibers has been optimized to absorb and dissipate loads, which delivers a confident and comfortable ride. The fork also uses various fiber types based on their specific properties to manage different load types as well as possible in the areas in which they occur—such as side load, torsion, and impact. The WCS Carbon Disc Road Fork features a 46mm rake and includes a compression plug. Welcoming flat-mount disc calipers, this fork also fits up to 30mm tires, depending on tire make and model. - Material: carbon fiber - 1-1/8" straight steerer with integrated 45-degree crown race - Fits 1-1/8 and 44mm headtubes with appropriate headsets - 100x12mm thru-axle (included) - Flat Mount disc brake - Disc brake rotor compatibility: 140 / 160mm - Steerer length: 300mm - Crown diameter: 46mm - Axle-Crown: 371mm - Rake/Offset: 46mm - Spacing: 40mm - Minimum tire clearance: 4mm - Wheel compatibility: 700c - Weight: 390g (with uncut steerer / not including axle)

Tom Ritchey was riding off-road decades before gravel riding was ever a "thing," and the new WCS Carbon Cross Gravel Fork is the manifestation of the experiences enjoyed on all of those dirty rides mixed with the legendary engineering for which Ritchey is famous. Built from life and ready for your drop bar off-road adventures, this full monocoque carbon fork delivers precision and confidence while offering stability and comfort along some of the more rugged terrain you'll encounter. With logical features—like enough room tires up to 40mm wide, the ability to run 12 or 15mm thru-axles, and ability to run flat-mount disc brakes—the Ritchey WCS Cross Gravel Fork is ideal for long-distance gravel events, your local cyclocross series, spontaneous weekend adventures, and everything in between. - Material: carbon fiber - 1-1/8" straight steerer with integrated 45-degree crown race - Fits 1-1/8 and 44mm headtubes with appropriate headsets - 100x12mm thru-axle (included) - Flat Mount disc brake - Disc brake rotor compatibility: 140 / 160mm - Steerer length: 300mm - Crown diameter: 47mm - Axle-Crown: 383mm - Rake/Offset: 47mm - Spacing: 53mm - Minimum tire clearance: 6mm - Wheel compatibility: 700c - Weight: 430g (with uncut steerer / not including axle)

You love the accuracy, efficiency, and trail feedback that only a rigid mountain bike fork can provide. And, of course, you love carbon fiber. The Ritchey WCS Carbon Mountain Bike fork was made for you and your riding style. Our deep mountain biking heritage, decades of on-trail research, and mastery of modern materials come together to provide a fork that offers an unrivaled riding experience. The one-piece monocoque construction (WCS) of this fork also includes full carbon dropouts as well as non-removable, one-piece carbon disc brake tabs. This fork also features suspension-corrected axle-crown height, plus a Ritchey compression plug is included. - Material: carbon fiber - Quick release (not included) - Post Mount disc brake - Disc brake rotor compatibility: 160mm (max 180mm) - Steerer length: 300mm - Crown diameter: 50mm (straight 1-1/8”) – 61mm (tapered 1-1/2”) - Fork lenght: 459mm (27.5”) - 470mm (29”) - Rake/Offset: 42mm (27.5”) – 45mm (29”) - Spacing: 87mm - Minimum tire clearance: 6mm - Weight: 615g (with uncut steerer / not including axle)

The best adventures happen once the challenge has been accepted. For most of his life, Tom Ritchey has invented bicycles and components that exceed expectations. This time Tom created the Mountain Adventure Fork with rack mounts for your gear, a fender mount to repel grime, and three multi-purpose mounts on the fork blades for stowing essentials. Should you be tempted to cycle the world or session on local trails, the Mountain Adventure Fork is suspension-corrected for hardtail frames like the Ritchey P-29er or the Ultra. Fast, lightweight, and comfortable, this fork is for sharpening your singletrack skills or going the (ultra) distance.

With nearly 50 years of designing and building bicycles and components dedicated to adventures that go beyond limits or expectations, Tom created the new Ritchey WCS Adventure Fork for those of us that are unbound by the constraints of riding-surface type, seemingly insurmountable distances, or what you can carry on your bike. The new one-piece carbon monocoque WCS Adventure Fork with a tapered steerer has been meticulously engineered and painstakingly built to perform with razor-sharp accuracy, deliver a high level of comfort, and offer practical features for all manner of cycling adventures. Built with High Modulus Fiber (HMF), this impeccable adventure fork offers superior strength while also reducing road chatter fatigue on those endless days and nights in the saddle. Smooth internal fiber flow in the crown/steerer area delivers the best force transfer from the crown to the shaft and offers increased impact strength for those potholes you didn’t see. With your desire to ride far and long in any condition or under any circumstance, the WCS Adventure Fork features rack mounts for packs full of gear and a fender mount to keep the grime off you and your bike. Three multi-purpose mounts on the legs give you more places to stow the necessities you gather at the last cafe. Welcoming flat-mount disc brake calipers, the WCS Adventure Fork also fits up to 52mm tires (700c) or 2.4” tires (650b) - depending on tire make and model – making this fork the ultimate addition to any rig assembled for the purpose of seeking, discovering and enjoying adventure.

Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. Their new R-Series forks continue this tradition. FEATURES - Fully redesigned. - Laboratory tested and team proven. - New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance. - All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race. - New, optimized, 4mm dropout shape for grind and peg clearance. - Updated 7075-T6 pre-load bolt - Proven 41-Thermal processed 4130 chromoly - Legendary lifetime replacement warranty SPECS - 32mm traditional offset - 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)

- Clamps on to dual-Crown fork stanchions to prevent damage to frame - Easy to install and adjust, More secure and lower profile than stock bumpers - Molded loops allow clean and easy zip-Tie number plate mounting - Available for 35mm boxxer or 40mm fox stanchions, Sold in pairs

The Circus project started as a way to get our slopestyle riders into competition, but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade. - Coil Spring - ABS+ Compression Damping w/ Jump Stack - Adjustable TPC Rebound Damping - Absolute+ cartridge platform oil damping system: specifically tuned for Dirt Jumping - 20mm hex axle provides superior torsional stiffness - Forged I-beam style crown: bigger, stronger and more durable - 1-1/8" threadless steel steerer and 32mm steel stanchions - Can be reduced to 80mm travel with included spacers

The Circus project started as a way to get our slopestyle riders into competition, but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade. - 80/100mm or 120/130mm Internally Adjustable Travel - Air Spring - ABS+ Compression Damping w/ Jump Stack - Adjustable TPC Rebound Damping - Wheel Size: 26" - 130mm travel models can be reduced to 120mm and 100mm models can be reduced to 80mm travel using included spacers - 20mm hex axle provides superior torsional stiffness - Absolute+ cartridge platform oil damping system: specifically tuned for Dirt Jumping - Forged I-beam style crown: bigger, stronger, and more durable - Alloy steerer, and 32mm aluminum stanchions

Get Inverted. Back and better than ever the new Dorado Expert is ready to take on the gnarliest conditions mountain biking can provide. Whether you’re looking to cut seconds off the splits, lap the local park, or get sendy in the back hills of Utah the Dorado Expert has you covered. Featuring an all-new 37mm chassis, completely redesigned internals, and on-trail precision that only inverted forks can provide the new Dorado is your ticket to the best ride you’ve ever had. Key Features: - New 37mm chassis results in a massive increase in stiffness and ride quality. The new chassis is 20% stiffer compared to our former 36mm version - Inverted Design provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain. - The Dorado Air Spring system contains a unique balancing valve that equalizes the positive and negative air chambers during the air-fill process resulting in a consistent feel without any flat or dead spots. It also allows easy Travel Adjustability from 180 to 190 and 203mm without the need for any spare parts. - IVA (Incremental Volume Adjust) modifies the volume in the positive air chamber with self-contained spacers dictating the position of the IVA piston and your volume amount. - The new TPC+ Damper has increased oil volume and improved flow paths for improved bump compliance and increased consistency. TPC+ features two compression pistons, a hydraulic bottom out, and a spring-backed IFP for a smooth and predictable feel for every impact. Adjustments include; High-speed compression, Low-speed compression, and Low-speed rebound. - Fits both 29" and 27.5" wheels. Markings on the outer legs indicate the proper clamping point for ideal axle-to-crown measurements depending on wheel size. The fork legs can be used with both wheel sizes. - Two Crown Options are available with this fork. The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible. - TSR Bleed Screws allow you to release excess pressures built up in the outer legs of your fork while riding keeping your fork smooth and supple all day long. Product Details: - 37mm 6000 Series Aluminum stanchions with carbon fiber legs - Externally Adjustable: high-speed compression, low-speed compression, and rebound - Dorado air spring with IRT (Infinite Rate Tune) volume adjuster allows the rider to adjust mid-stroke support and bottom-out progressivity independent of initial spring rate - TPC+ Damper with HBO (Hydraulic Bottom Out) - TSR Bleeders - Includes removable bolt-on fender

- Replacement leg guards for Dorado forks

The Machete is purpose-built for slicing trails, with Kwik Toggle compression damping inspired by our renowned Absolute+ technology. Kwik Toggle achieves on/off lockout simplicity in a lightweight, practical package. - TS air spring with in-leg adjustable TPC rebound damping - Kwik-Toggle damper with lockout, adjustable rebound, and high-speed compression - 32mm black anodized stanchions with hollow bore forged aluminum crown - Easily upgradeable to remote using MILO upgrade kit part #314934 - Travel is internally adjustable from 80 to 120mm in 10mm increments - Disc brake only (74mm/6" post-mount) - 27.5x3.0"/29x2.5" maximum tire width

Featuring 37mm stanchions and our Reverse Arch design the Mezzer Pro is the stiffest Enduro fork on the market… it’s also the lightest. How did we manage to accomplish this you ask? Well, it’s not hollow if that’s what you're wondering. In fact, this fork is loaded with technologies such as a fully sealed MC² damper, our proven Dorado air spring, and the life-changing IRT volume adjuster. What does all this mean? It means you no longer need to pick two, you can have the lightest, stiffest, and incredibly adjustable fork all at once. Key Features: - 37mm stanchions, Reverse Arch design, and Hexlock SL2 axle combined together result in ultimate stiffness - Originally developed for the Dorado down-hill fork, the Dorado Air Spring offers ultimate sensitivity featuring a self-equalizing negative air spring. When inflating the fork both the positive and negative air chambers are filled simultaneously equalizing the pressures to create an incredibly supple feel - IRT (Infinite Rate Tune) volume adjuster allows control over the mid-stroke support and bottom-out progressivity independent from the initial spring rate to independently tune small bump sensitivity and big-hit performance - Sealed MC² damper provides a range of blow-off thresholds to satisfy any requirement with separate high-speed and low-speed adjustments. Utilizing a bladder, our new sealed cartridge maintains damping consistency in the most severe riding conditions. - 140mm to 180mm internally adjustable travel in 10mm increments (travel spacers included) - 27.5” and 29” wheels - Integrated flexible fender can be installed/removed by three small screws threaded into the arch of the fork Product Details: - MC² bladder cartridge damper offers adjustable high-speed compression damping, low-speed compression damping - Expansion bladder with patent-pending blow-off valve compensates for oil displacement, with lower friction than a traditional internal floating piston - 37mm chassis with torsional stiffness up to 30% higher than similar forks from competitors - Dorado Air spring features an enlarged negative air chamber for linear initial stroke and reduced IRT volume for progressive end stroke - Internally adjustable travel from 180mm to 140mm

Lightweight, stiff, compliant, and available in three sizes to give you more choices for converting your bike over to rigid. With 34mm carbon legs and forged aluminum crowns and dropouts, the Rock Solid family of forks will make your machine a precise, feather-weight, singletrack screamer. 490mm, 465mm, and 445mm models are available. - Designed for 26", 27.5", or 29" wheel MTB applications, disc only (74mm post-mount) - 34mm carbon legs with forged aluminum crown and dropouts - Max Rotor Size 185mm or may void the warranty - 3 different sizes for optimal ride height.

The MCX Max is a monster cross/gravel carbon fork with clearance to fit 29 x 2.1" tires and 27.5" x 2.25" tires - with practical mud clearance. Extra long 350mm aluminum steerer (Most carbon forks have steerers only 280-300mm long) NOTE: Newer stock will come with a thru-axle bolt instead of a thru-axle with QR cam lever (There are also two lighter MCX models that have straight 1-1/8" steerers and are available in QR or thru-axle. ) – Axle to crown: 406mm – Rake: 50mm – 15mm x 100 thru-axle – Disc brake mount: Flat mount – Internal cable routing – 3-pack mount accessory bosses (3kg capacity per leg) – Single set of fender eyelets – Steerer: Aluminum, 1-1/8"-1-1/2" tapered x 350mm – Weight: 970g (including thru-axle and extra long uncut steerer)

At under 1300g, the 32 Step-Cast is a superlight MTB fork and made for marathon racing. This fork features an incredibly light and short travel-specific GRIP SL Damper that not only saves weight, but provides an unparalleled ride feel in its class. With a sleek reverse arch, this fork also gains 40% stiffness over its predecessor - Features an incredibly light and short travel-specific GRIP SL Damper that not only saves weight, but provides an unparalleled ride feel in its class - Riders experience a supple stroke with an optimized pedal-to-bump efficiency, as well as a smooth blowoff force in lockout mode to reduce rider fatigue - The rear arch matrix was generatively designed to increase stiffness by 40% while minimizing the weight penalty - The premium 7000 Series aluminum, zero-offset crown supports angled upper tubes that not only contribute to the 32 Step-Cast's stiffness, but when combined with the ultra-light steerer tube, save approximately 20g over the previous model - Fitted with the proven and reliable FLOAT EVOL air spring - Kabolt SL thru-axle drops an additional 12g over the standard Kabolt axle by eliminating the additional weight of the axle nut and decreasing the flange diameter - Kashima Coating on upper tubes for added durability

At under 1300g, the 32 Step-Cast is a superlight MTB fork and made for marathon racing. This fork features an incredibly light and short travel-specific GRIP SL Damper that not only saves weight, but provides an unparalleled ride feel in its class. With a sleek reverse arch, this fork also gains 40% stiffness over its predecessor - Features an incredibly light and short travel-specific GRIP SL Damper that not only saves weight, but provides an unparalleled ride feel in its class - Riders experience a supple stroke with an optimized pedal-to-bump efficiency, as well as a smooth blowoff force in lockout mode to reduce rider fatigue - The rear arch matrix was generatively designed to increase stiffness by 40% while minimizing the weight penalty - The premium 7000 Series aluminum, zero-offset crown supports angled upper tubes that not only contribute to the 32 Step-Cast's stiffness, but when combined with the ultra-light steerer tube, save approximately 20g over the previous model - Fitted with the proven and reliable FLOAT EVOL air spring - Kabolt SL thru-axle drops an additional 12g over the standard Kabolt axle by eliminating the additional weight of the axle nut and decreasing the flange diameter - Kashima Coating on upper tubes for added durability

Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Performance rises to meet the demand. The crown is designed to increase stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor. - GRIP Push-Lock damper features 3-position settings for easy setup and firm mode for pedaling efficiency (Remote sold separately) - The rear arch matrix was generatively designed to increase stiffness by 40% while minimizing weight - Premium 7000 series aluminum crown supports angled upper tubes, rather than relying on extra material to achieve overall rake and steering stiffness - Kabolt SL thru-axle drops an additional 12g over the standard Kabolt axle by eliminating the weight of an axle nut and decreasing the flange diameter - Fitted with the proven and reliable FLOAT EVOL air spring - Black anodized upper tubes for added durability

The lightest suspension fork FOX has ever built, the 32 Taper-Cast Gravel Fork greatly improves rider experience, increases control, takes the edge off extended gravel rides, and dramatically expands the terrain you can cover. This 32TC fork features an incredibly light and short travel-specific GRIP SL Damper that not only saves weight, but provides an unparalleled ride feel in its class. - GRIP SL is an incredibly light, short travel-specific damper that not only saves weight, but also provides an unparalleled ride feel - Features a sleek drop crown profile and new knob shapes that drastically improve downtube clearance, for fitment on all frame sizes and styles - Sleek, reverse arch design further improves fitment, decreases frontal area for better aerodynamics, and provides stiffness through the arch matrix design - Supple stroke with an optimized pedal-to-bump efficiency, as well as a smooth blowoff force in lockout mode to reduce rider fatigue - Three on-the-fly compression damping positions: Open, Medium, Firm - Optimized for 700c – not 650b compatible

XC courses are more technical than ever with the latest longer-travel XC bikes more than capable. With a stout full-width stance, increased travel and tire clearance, and svelte sub-1500g weight, the new 34 SL Factory suspension fork is built to exceed the demands of modern XC and downcountry. Features Kashima Coating on upper tubes for added smoothness and durability - Full-width 34mm chassis with aggressive generative design-aided arch and crown for 17% increase in stiffness and 10mm increase in travel over 34 SC, at only 3% weight increase - 20mm increased bushing overlap for reduced friction and greater stiffness with no increase in axle-to-crown length (compared to 34 SC) - Longer air spring than 34 SC with larger negative volume mirrors 34 LT’s supple initial stroke and 34 SC’s supportive mid and end stroke - Double-butted damper side stanchion for weight savings - Lower Leg Bypass Channels relocated 90° inboard for improved bushing loading and reduced dynamic friction

XC courses are more technical than ever, with the latest longer-travel XC bikes more than capable. With a stout full-width stance, increased travel and tire clearance, and svelte sub-1500g weight, the new 34 SL Factory suspension fork is built to exceed the demands of modern XC and downcountry. Features Kashima Coating on upper tubes for added smoothness and durability - Full-width 34mm chassis with aggressive generative design-aided arch and crown for 17% increase in stiffness and 10mm increase in travel over 34 SC, at only 3% weight increase - 20mm increased bushing overlap for reduced friction and greater stiffness with no increase in axle-to-crown length (compared to 34 SC) - Longer air spring than 34 SC with larger negative volume mirrors 34 LT’s supple initial stroke and 34 SC’s supportive mid and end stroke - Double-butted damper side stanchion for weight savings - Lower Leg Bypass Channels relocated 90° inboard for improved bushing loading and reduced dynamic friction

XC courses are more technical than ever, with the latest longer-travel XC bikes more than capable. With a stout full-width stance, increased travel and tire clearance, and svelte sub-1500g weight, the new 34 SL Factory suspension fork is built to exceed the demands of modern XC and downcountry. Features Kashima Coating on upper tubes for added smoothness and durability - Full-width 34mm chassis with aggressive generative design-aided arch and crown for 17% increase in stiffness and 10mm increase in travel over 34 SC, at only 3% weight increase - 20mm increased bushing overlap for reduced friction and greater stiffness with no increase in axle-to-crown length (compared to 34 SC) - Longer air spring than 34 SC with larger negative volume mirrors 34 LT’s supple initial stroke and 34 SC’s supportive mid and end stroke - Double-butted damper side stanchion for weight savings - Lower Leg Bypass Channels relocated 90° inboard for improved bushing loading and reduced dynamic friction

XC courses are more technical than ever, with the latest longer-travel XC bikes more than capable. With a stout full-width stance, increased travel and tire clearance, and svelte sub-1500g weight, the new 34 SL Performance Elite suspension fork is built to exceed the demands of modern XC and downcountry. - Full-width 34mm chassis with aggressive generative design-aided arch and crown for 17% increase in stiffness and 10mm increase in travel over 34 SC, at only 3% weight increase - 20mm increased bushing overlap for reduced friction and greater stiffness with no increase in axle-to-crown length (compared to 34 SC) - Longer air spring than 34 SC with larger negative volume mirrors 34 LT’s supple initial stroke and 34 SC’s supportive mid and end stroke - Double-butted damper side stanchion for weight savings - Lower Leg Bypass Channels relocated 90° inboard for improved bushing loading and reduced dynamic friction

XC courses are more technical than ever, with the latest longer-travel XC bikes more than capable. With a stout full-width stance, increased travel and tire clearance, and svelte sub-1500g weight, the new 34 SL Performance suspension fork is built to exceed the demands of modern XC and downcountry. - Full-width 34mm chassis with aggressive generative design-aided arch and crown for 17% increase in stiffness and 10mm increase in travel over 34 SC, at only 3% weight increase - 20mm increased bushing overlap for reduced friction and greater stiffness with no increase in axle-to-crown length (compared to 34 SC) - Longer air spring than 34 SC with larger negative volume mirrors 34 LT’s supple initial stroke and 34 SC’s supportive mid and end stroke - Double-butted damper side stanchion for weight savings - Lower Leg Bypass Channels relocated 90° inboard for improved bushing loading and reduced dynamic friction

Packed with features to dominate the descents, the 36 answers the call from aggressive all-mountain riders. Available in both trail-focused GRIP X and gravity-focused GRIP X2 damper options. - GRIP X damper exudes exemplary descent performance, refined for less weight, easier setup, and an easy access firm mode for pedaling efficiency - Generative design-assisted lower leg arch shape increases torsional stiffness by 20%, while reducing overall material - Additional 30mm bushing overlap than the prior model 36, reduces chassis friction, increasing stiffness, and boosting performance - New compliant FLOAT EVOL air spring design allows for a slight misalignment under load, reducing chassis friction noticeably - Lower leg bypass channels were relocated 90° inboard to a lower stress area, reducing dynamic friction under bending forces - Double-butted stanchion (on damper side) shaves weight, helping us achieve goal of zero weight increase - New air spring top cap for easier air volume adjustments, removable with cassette tool (Sold separately) - Redesigned bleeders are sleeker and easier to operate - Kabolt X axle shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design - Kashima Coating on upper tubes for added smoothness and durability

Packed with features to dominate the descents, the 36 answers the call from aggressive all-mountain riders. Available in both trail-focused GRIP X and gravity-focused GRIP X2 damper options. - GRIP X2 is the most tunable, supportive, and smoothest descent-focused damper FOX has created, so riders reap the benefits of sitting higher in the travel while tires stay glued to the ground, cornering with increased traction, and experience reduced fatigue - Generative design-assisted lower leg arch shape increases torsional stiffness by 20%, while reducing overall material - Additional 30mm bushing overlap than the prior model 36, reduces chassis friction, increases stiffness, and boosts performance - New compliant FLOAT EVOL air spring design allows for a slight misalignment under load, reducing chassis friction noticeably - Lower leg bypass channels were relocated 90° inboard to a lower stress area, reducing dynamic friction under bending forces - Double-butted stanchion (on damper side) shaves weight, helping us achieve the goal of zero weight increase - New air spring top cap for easier air volume adjustments, removable with cassette tool (Sold separately) - Redesigned bleeders are sleeker and easier to operate - Kabolt X axle shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design - Kashima Coating on upper tubes for added smoothness and durability

Packed with features to dominate the descents, the 36 Performance Elite answers the call from aggressive all-mountain riders. Trail and all-mountain riders no longer need to choose between a descent-focused damper or a lightweight endurance damper. The GRIP X damper exudes exemplary descent performance, refined for less weight, easier setup, and easy access to firm mode for pedaling efficiency. - GRIP X damper exudes exemplary descent performance, refined for less weight, easier setup, and easy access to firm mode for pedaling efficiency - Generative design-assisted lower leg arch shape increases torsional stiffness by 20%, while reducing overall material - Additional 30mm bushing overlap than the prior model 36, reduces chassis friction, increases stiffness, and boosts performance - New compliant FLOAT EVOL air spring design allows for a slight misalignment under load, reducing chassis friction noticeably - Lower leg bypass channels were relocated 90° inboard to a lower stress area, reducing dynamic friction under bending forces - Double-butted stanchion (on damper side) shaves weight, helping us achieve goal of zero weight increase - New air spring top cap for easier air volume adjustments, removable with cassette tool (Sold separately) - Redesigned bleeders are sleeker and easier to operate - Kabolt X axle shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design - Black anodized upper tubes for added durability

Packed with features to dominate the descents, the 36 Performance answers the call from aggressive all-mountain riders. This fork features a GRIP 3-position damper, an adjustable FLOAT air spring, and rebound adjust. - GRIP damper features a 3-position lever for easy setup and firm mode for pedaling efficiency - Generative design-assisted lower leg arch shape increases torsional stiffness by 20%, while reducing overall material - Additional 30mm bushing overlap than the prior model 36, reduces chassis friction, increases stiffness, and boosts performance - New compliant FLOAT EVOL air spring design allows for a slight misalignment under load, reducing chassis friction noticeably - Lower leg bypass channels were relocated 90° inboard to a lower stress area, reducing dynamic friction under bending forces - Double-butted stanchion (on damper side) shaves weight, helping us achieve the goal of zero weight increase - New air spring top cap for easier air volume adjustments, removable with cassette tool (Sold separately) - Redesigned bleeders are sleeker and easier to operate - Kabolt X axle shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design - Black anodized upper tubes for added durability

Trail riders have long had to choose between over-forking for stiffness or under-forking for lower weight. The 36 SL Factory suspension fork takes the new 36 chassis and saves weight at strategic locations, creating a no-compromise lightweight fork for today’s hard-hitting—yet shorter travel—Trail riders. Features Kashima Coating on upper tubes for added smoothness and durability. - New generatively designed arch and crown shaping increase torsional stiffness by 20% over 34, while minimizing weight increase - New compliant air spring design reduces chassis friction - New double-butted damper side stanchion sheds grams - Lower Leg Bypass Channels relocated 90° inboard for improved bushing loading and reduced dynamic friction - New easier to operate, low-profile bleeders