Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Tools
$47.25
BB30 service kit for SRAM DUB cranks.
- Includes (2) Enduro 6806/29 ABEC-3 sealed bearings and 2 retaining clips
- Bearing Dimensions: OD: 42mm / ID: 29mm / Width: 7mm
- Enduro ABEC-3 bearings
- Use with SRAM DUB cranks
Note: SRAM DUB cranksets are not designed to work in 68mm or 73mm wide shells with inboard bearings. Use only if your frame is a direct-fit bearing system, and the BB shell width is 86.5mm or wider.
$26.25
The Bottom Bracket Gauge Tool was designed to provide all the necessary measurements to identify the proper bottom bracket for a specific bike configuration. A metric scale runs along the long edges for measuring bottom bracket shell width and crank spindle lengths. Durable red anodized aluminum with laser etching. Overall size is 7" x 3" x 0.125".
The gauge can measure:
- bottom bracket width
- bottom bracket shell inner diameter
- crank spindle length
- crank spindle diameter
- bearing inner diameter
Specifications:
Measures crank spindle diameters:
22mm, 24mm, 29mm, 30mm
Measures bearing inner diameters:
22mm, 24mm, 29mm, 30mm
Measures bottom bracket shell inner diameters:
37mm, 41mm, 42mm, 46mm
Measures bottom bracket shell widths:
61mm, 68mm, 73mm, 79mm, 86.5mm, 90mm, 92mm, 95mm, 100mm, 120mm, and 132mm
Measures crank spindle lengths up to 180mm
$19.99
Shimano Direct Mount Chainring Socket
$92.40
- Anodized aluminum construction. Includes mounting hardware - Measures the diameter of loose ball bearings - Measures the inner and outer diameter of cartridge bearings - Metric and Standard measurements
$9.99
For use in conjunction with our reaming pedal taps, this thread insert is held in place with a strong thread locker and allows you to install any standard pedal.
- Pack of 10, fits 9/16" pedals.
$10.00
- Pedal thread inserts are used to replace damaged threads in cranks
$39.99
Topeak's Rocket Ratchet features a fine tooth ratchet mechanism with reverse lever and thumb wheel for quick rotation and control in tight spots and includes hardened steel tools in 2, 2.5, 3, 4, 5, 6 and 8mm hex, T10, T25 Torx and #2 Phillips bits, 2 plastic tire levers and magnetic bit holder. It's everything you need in a compact, lightweight package.
$25.00
Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally.
- Repairs large punctures and slices
- Reacts with Stan's sealant to form an instant, airtight seal
- Barbed plastic tip anchors into tire and will not pull out when riding
- Flexible material and laser-cut shape conforms to puncture and bonds with sealant
- Wears off clean, no trimming needed, and can not be felt while riding, even on road tires
- Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover
- Includes two pre-loaded DARTs for sealing multiple and larger punctures
- Clear caps keep DARTs clean and unthread quickly for fast deployment
- Simple and easy to refill
$29.99 - $35.00
Specialized's Top Cap Chain Tool replaces your top cap and places a chain tool and spare chain quick link inside your bicycle fork's steerer tube. This way you'll never forget your chain tool. This tool can be installed in any 1-1/8th inch steerer tube that is at least 32mm deep. It's available in models that work with either aluminum or carbon steerer tubes.
$74.00
Shimano Genuine Professional disc brake bleed kit
Includes:
- TL-BR002 Funnel unit for ST series Road Brake lever (M7 thread bleed port)
- TL-BR003 Funnel unit for BL series MTB brake lever (M5 thread bleed port)
- TL-BR001 Syringe unit
- 4-pcs set of Bleed Blocks (Piston spacer)
Features:
- New oil spill guard lid with an integrated oil stopper holder
- Improved syringe unit design now using a stronger threaded tube joint and revised locking clip
- Bleeding instructions available for download under 'Documents & Links' below
$19.00
Shimano Genuine disc brake bleed Funnel unit for ST type Road brake lever (M7 thread bleed port)
Features:
- Oil spill guard lid with an integrated oil stopper holder
- Funnel base
- Bleeding instructions available for download under 'Documents & Links' below
$5.00
Shimano Wiring Plug Tool for use with Di2
- Tool is required to assist Di2 shifter plug installation
- Shimano TL-EW02 tool for connecting and disconnecting the Di2 wiring harness and shifter plugs
- For use with Dura-Ace 9070, Ultegra 6870/6770 and Alfine Di2 components and E-Tube wiring
$32.99
- For installing DUB BSA bottom brackets
- Compatible with a 3/8-inch drive torque wrench so you can torque to spec
$105.99
- Pro Mineral Oil V2 bleed kit includes: (2) premium syringes, M4 fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting, and with or without Maxima mineral brake oil. Compatible with SRAM DB8 and Maven brakes
- Standard Mineral Oil V2 bleed kit includes: (2) standard syringes, M4 fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without Maxima mineral brake oil. Compatible with SRAM DB8 and Maven brakes
- Pro DOT V2 Brake bleed Kit includes: (2) premium syringes/fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without DOT 5.1 hydraulic fluid. Compatible with SRAM/Avid hydraulic DOT brakes
- Standard DOT V2 brake bleed kit includes: (2) standard syringes/fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without DOT5.1 hydraulic fluid. Compatible with SRAM/Avid hydraulic DOT brakes
$22.95
The smartest, most convenient torque key now comes with enough bits to suit every need. Make sure those stem bolts are tight enough, and double check the torque on the seatpost bolt while you're at it. The Ritchey Bicycle Torque Key is an essential tool for those important bolts. Available with 4 or 5Nm options, this 6-bit set includes just about every bit you'll need for your bike, and a convenient holder to keep it all organized.
- Hex 3/4/5mm
- Torx T-20/25
- Phillips #1
- 4 or 5Nm max torque
- Bit holder included
$18.99
Checking your chain for wear is one of the simplest things any cyclist can do to maintain drivetrain performance and minimize maintenance costs. The Pedro's Chain Checker Plus II makes this task quick and easy offering a simple check of 50% and 75% chain wear. To ensure the maximum life from your chain and accuracy of measurement, the tool employs a three-point design which properly isolates pin wear from roller wear. Other two-point designs do not and can incorrectly indicate a worn chain, robbing the user of additional miles and money. The Chain Checker Plus II also includes a chain hook tool, perfect for simplifying chain removal and installation, and a chainring nut wrench, essential for removal and installation of chainrings.
- Three point chain wear tool design properly isolates pin wear from roller wear
- Includes a chain hook tool for simplifying chain removal and installation, and a chainring nut wrench for removal and installation of chainrings
- Two chain wear indicators: 50% and 75%
- Improved user instructions are laser etched on the tool
$15.99
A great way to make cleaning easier is to remove your wheels. While this may seem excessive, removing the wheels from your bike opens up many tight areas that are tough to clean, allowing easier access and better visibility of these surfaces. The Pedro's Chain Keeper was designed with this wheels-off technique in mind and makes sure your chain stays off your frame, preventing damage and keeping your drivetrain free to turn as is commonly needed during cleaning. Try it out! The Chain Keeper inserts into the right rear dropout when the wheel is removed for cleaning, storing, or transporting your bike. The quick-release lever allows for fast and easy installation and removal.
$46.99
- Dual-density, ergonomic thermoplastic handles for comfortable grip and leverage.
- Heat-treated tool steel construction for strength and durability.
- Includes: #1 and #2 Phillips plus 4.5, 5.5, and 6.5mm flat-blade screwdrivers and storage pouch.
These professional grade screwdrivers are designed for ease of use, comfort, and lasting durability. This five piece set provides the sizes required to work on all bicycles. Backed by Pedro's lifetime warranty.
$141.99
The chain tool is fundamental to bicycle mechanics. As drivetrains push the envelope, however, chain tools must evolve to keep pace. The Pedro's Tutto Chain Tool II has done just that. The Tutto II blends ergonomic, organic design and noticeable industrial stature with patented innovations like the Fit Dial and RPG and novel additions like the Peening Bit for Campagnolo® 11, 12, and 13-speed chain assembly, ergonomic set-back handle design, and Guide Pin Shear Slot. These unique features and a new replaceable bridge make the Tutto II the most versatile chain tool available, compatible with almost any chain from single speed to 13-speed and beyond including SRAM® Flattop chains. Lastly, the Tutto II was designed with season after season of professional service in mind featuring heat-treated tool steel construction for superior strength and lasting performance, and simple disassembly to make servicing and part replacement easy. Backed by Pedro's lifetime warranty.
Key Features:
Fit Dial: The Fit Dial is used to adapt your Tutto Chain Tool to almost any modern chain. The Fit Dial wheel has 4 anvil features. Inspecting closely you will find that each anvil feature differs from the other in height or style. Each anvil is marked with a series of dots denoting which setting is in use. A Fit Dial usage guide is laser etched on the Tutto handle for easy reference. Each indexed setting is easily selected by rotating the Fit Dial.
RPG: The RPG, or Retracting Pin Guide, is a multi-purpose feature found only on Tutto Chain Tools and Pro Chain Tools. First, the spring loaded RPG supports the pin up to the face of the chain eliminating broken pins and ensuring perfect alignment every time. Second, for chains with guide pins like Shimano® or Campagnolo®, the RPG encloses the guide pin to prevent loss, bending or breakage, and ensures perfect installation. Third, the RPG accepts the Peening Bit required for installation of Campagnolo® 11, 12, and 13-speed chains.
Peening Bit: The Peening Bit is handily stored in the base of the Tutto handle. This bit is used for Campagnolo® 11, 12. and 13-speed chain installation which requires a peening operation during installation of the chain rivet. The bit is easily removed from the handle and fits onto the end of the RPG allowing installation of Campagnolo® 11, 12, and 13-speed chains.
Guide Pin Shear Slot: For chains that use a guide pin for installation, the Guide Pin Shear Slot provides an integrated tool to remove the guide section from installation pins. After pressing the master pin into the chain, simply insert the guide section into the shear slot and rotate the tool up or down.
- Premium shop quality chain tool with patented Fit Dial and RPG for superior functionality and reliability.
- Replaceable bridge ensures compatibility with all current and future chains from single to 13-speed and beyond including SRAM® Flattop chains. Visit pedros.com/chainfit for compatibility info.
- Includes a premium EVA foam insert for storage.
$15.95
Park combines the three most used bolt sizes into one convenient wrench. The 3-Way Sprocket Wrench sports 8, 9 and 10mm sockets made from forged chrome-vanadium steel in Park's classic Y-shape that offers plenty of leverage and a comfortable grip.
$14.95
Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide.
AWS-1 FEATURES
- 4mm, 5mm, and 6mm hex set
- Wrenches made from industrial tool steel, through hardened and tempered for long life
- Chamfered tips for a perfect fit
$71.95
Shop-quality, adjustable torque driver that limits torque applied to fasteners, preventing over-tightening and damage to lightweight components. The ATD-1.2 features all-metal internal construction with a comfortable, ergonomic composite molded grip. Each tool is assembled and calibrated at Park Tool's factory in Minnesota.
$16.95
Removes and installs crank caps on Shimano® Hollowtech II® cranks. Includes built in hook to lift the safety plate, speeding crank removal. Steel, investment cast body provides good leverage and includes an option to use with an 8mm hex wrench for removing seized caps.
$23.95
The BBT-22 is a shop-quality tool for installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-22 ensures maximum engagement with the bottom bracket cup. It can be used with a 3/8-inch drive torque wrench, a 3/8-inch ratchet driver, a 32mm wrench, the Park FRW-1 Freewheel Remover Wrench (sold separately), or a 1-inch wrench.
$27.95
A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 12-notch tool fittings, including Chris King ThreadFit T47 & ThreadFit 30 bottom brackets. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive.
Fits 12-notch bottom bracket tool fittings with a major diameter of 50–53 mm and a minor diameter of 48.2 mm, including:
- BBInfinite T47
- Chris King ThreadFit T47
- Chris King ThreadFit 30
- Enduro BBRight Torqtite
- Hambini T47
- Rotor T47 External 30mm
- Rotor BBright, BB30, BB386EVO, and PF30 thread-together
$27.95
A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 16-notch tool fittings, including Enduro T47 & PF30 bottom brackets. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive.
Fits 16-notch bottom bracket tool fittings with a major diameter of 52-54 mm and a minor diameter of 48.8 mm, including:
- CeramicSpeed T47/86
- Enduro T47 (30mm and DUB spindles)
- Enduro BB30/30a TorqTite (30mm and DUB spindles)
- Kogel T47
- SRAM T47 DUB
- White Industries T47
- White Industries PF30 Thread-Together
$26.95
A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 16-notch tool fittings, including Shimano XTR BB93, Dura-Ace BB9000, and Token bottom brackets. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive.
The BBT-49.3 features integrated threads for full compatibility with the Park Tool BBT-RS Bottom Bracket Tool Retaining System (sold separately). The BBT-RS uses an adjustable spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage.
Fits 16-notch threaded bottom bracket tool fittings with a major diameter (outside of notches) of 39-40 mm and a minor diameter (inside of notches) of 37.6 mm, including:
- Shimano XTR BB93
- Shimano Dura-Ace BB9000
- Token
Also fits chainring lockrings on Shimano STEPS square spindle e-bike systems including:
- E6000
- E6002
- E6050
- Replacement for Shimano TL-FC38 tool
- 3/8" drive fitting
$26.95
A precision CNC-machined aluminum tool for the installation and removal of select components with 16-notch tool fittings, including bottom brackets, center lock disc brakes, and e-bike motor lockrings. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive.
The BBT-69.4 features integrated threads for full compatibility with the Park Tool BBT-RS Bottom Bracket Tool Retaining System (sold separately). The BBT-RS uses an adjustable spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage.
Fits 16-notch tool fittings with a major diameter (outside of notches) of 44–45 mm and a minor diameter (inside of notches) of 42.7 mm, including:
- Shimano BB80, BB5700, XT BB70, BB51, and previous external bearing threaded bottom bracket cups
- Threaded bottom bracket cups from Campagnolo, Chris King, FSA MegaExo, Hope, SRAM/Truvativ GXP, Race Face X-type, Surly, Wheels, Fulcrum, and others
- Center lock disc brake rotor lockrings
- Bafang BBSH, BBS02 mid-drive motor lockrings
- 3/8" drive fitting
Page 1 of 35
Next page